Case Study #2

Equipment: model AL-600-CV/S-7K-2 dual-channel AC power sources
User: TI Automotive SYS. LLC
Application and Specific Requirement: Providing 7K Hz AC signal as “known ripple” to test the ripple durability of Toyota motors. The output transformers of the model AL-600-CV/S-7K-2 dual-channel AC power source were required to be able to pass high DC current.

Case Study #3

Equipment: model AL-100-CR-L/S-40K high frequency AC constant current sources
User: AVX Tantalum Corporation
Application and Specific Requirement: Providing 40K Hz high frequency AC constant current for capacitor ripple current tests

Case Study #4

Equipment: model AL-300-HF-A power amplifier and model AL-T100-V25/1200-F300K/500K transformer
User: Kimberly-Clark
Application and Specific Requirement: Providing 0-1200 V rms. at the frequency range of 300K – 500K Hz for IEC 60601-2 and IEC 60601-2-18 compliance tests

Case Study #5

Equipment: model AL-1500-FC-60-C0/10 linear AC power sources (linear frequency converter)
User: Hubbell Power Systems
Application and Specific Requirement: Providing PD (partial discharge) free power on high voltage capacitive products

Case Study #6

Equipment: model AL-200-CR-H/A AC constant current power amplifiers
User: Itron, Inc.
Application and Specific Requirement: Providing low distortion AC constant current for testing electric meters

Case Study #7

Equipment: model AL-200-CR-H/S-GPIB AC constant current power sources
User: GMC-I ProSys Limited
Application and Specific Requirement: Providing high current output AC constant current sources to power up highly inductive loads

Case Study #8

Equipment: model AL-200-CR-H/S-GPIB AC constant current power sources and model AL-200-CR-H/A Constant Current Power Amplifier
User: General Electric
Application and Specific Requirement: Providing AC constant current sources and power amplifiers to test protective relay products